
Executive summary
If I could only have access to one “medication” to treat infections from viruses (including measles, COVID, etc), bacteria (such as MRSA), fungi, and parasites (like malaria), chlorine dioxide would be my “go to.” It can also be used for household disinfection, wound disinfection, water purification, and more. It can be nebulized, added to a nasal saline rinse, etc.
As one of my readers wrote in the comments, “Anytime I feel anything coming on, one snort session with the nebulizer as Steve Kirsch says is all it takes. Works every time.”
In this article, I will describe the clever method I used to make chlorine dioxide in < 19 seconds of prep time (assuming all the materials are in front of you) and less than 8 cents of material cost (which is more than 10x cheaper than using messy chemicals).
My method requires no messy chemicals and no precise measurements. You can’t mess it up if you follow my instructions.
If you like using messy chemicals (or have them on hand and want to get rid of them), I added instructions for that too. You’ll want to have a micro scale in that case and I’ll show you the one I use.
If you follow my steps, your chlorine dioxide will last for months with minimal degradation.
I’ll also explain why I never make a 3,000 ppm solution like most people recommend. I’ll explain the ppm solution I make and why it is both more practical and more convenient.
If you have pneumonia or other serious respiratory infection, this article could literally save your life.
I’ve found that using chlorine dioxide as soon as possible once you know you are infected is the fastest path to recovery. This means that you’ll want to order the prep material ahead of time because if you wait until you are sick, it will be too late.
This is a method I invented myself, with the help of AI, after learning how others make it. My method is simpler, faster, more accurate, and no chemicals are needed. Your CDS will last for months and it’s only 8 cents for each 95mL batch. You are going to love it.
The method is so simple that it can be described in one photo with a caption of 4 lines, but I’ve included 13 photos showing each step so you can’t mess it up.
This is a special reward to my subscribers who support my work in taking down the COVID shots. If you’re not already a subscriber, this article will easily pay for itself many times over in the amount of sick time you will save. It might even save your life or the life of a loved one.
In my article I will cover:
-
Step-by-step how to make it in less than 19 seconds
-
Material list (everything you need to make it)
-
The unique concentration I make and why that’s the best
-
Photos of each step of the process
-
CDS protocols for treating respiratory infections, mouth infections, food poisoning, etc. and why higher concentration isn’t alway better
-
Where to go for more info, including a complete list of treatment protocols.
Click this link for the original source of this article.
Author: Steve Kirsch
This content is courtesy of, and owned and copyrighted by, https://stevekirsch.substack.com/ and its author. This content is made available by use of the public RSS feed offered by the host site and is used for educational purposes only. If you are the author or represent the host site and would like this content removed now and in the future, please contact USSANews.com using the email address in the Contact page found in the website menu.